|
[EDI-L Mailing List Archive Home]
[Message List]
[Reply To This Message]
RE: Setting up TRADAOMS partners on GEIS EDI EXPRESS
Hi there all,
Tradanet is the European version of EDI*EXPRESS. The difference is that it
runs on Unix rather than on Honeywell or IBM mainframes. The other
difference is the administration of the system is all done by the European
Operations group rather than the customer (to some degree).
As Tradanet is an interconnect to EDI*EXPRESS, your Trading Partnership
Request that you did on EDI*EXPRESS would have been automatically approved.
However, the Tradanet setup does not sound like it's been done.
To move forward from here you should contact your local GXS representative.
You should tell the GXS representative that you wish to Interconnect with
the European Tradanet service. The representative will ask you the EDI
Addresses of your Tradanet partners (these were what you used in your
trading partnership requests). Once you provide this to your
representative, that person will relay the information to our European
Operations whom will do the administration.
As I don't know where you are, I will point you to our main GXS web site at:
http://www.gxs.com
From there, click on the Customer Center and you will be away and talking to
your rep in no time (I think it even supports VoIP now [Voice over IP],
sorry, I'm not sure??)
Once you get your information to your GXS Rep, the admin can generally be
done overnight (as that is the day time in Europe - specifically Amsterdam
which is where they are located).
BTW> EDI*EXPRESS has a report called a Third Party Reject Report. You
should run this report to see if data you have sent to Tradanet has been
rejected or not. This report is designed for tracking data to
Interconnects.
Cheers...
Michael Burbury
GXS Australia
Systems Administration
-----Original Message-----
From: Uppaji Kothapalli [mailto:
Sent: Wednesday, October 09, 2002 3:05 PM
To: Burbury, Michael (GXS);
Subject: RE: [EDI-L] Setting up TRADAOMS partners on GEIS EDI EXPRESS
Hi Micheal, thanks for the inputs. Now we are having a
twist to the issue.
Two of our partners in Europe are using TRADACOMS and
with our reent migration to GEIS VAN, we are not able
to receive data from them at all.
1) Is it a must that all the TRADACOMS partners in
Europe have to come via TRADANET.
2)Who controls this TRADANET and what is the
relationship between it and GEIS.
3)I have set up the partnership in GEIS(in USA) and
the partners in Europe doesn't know the concept of
approving the partnerships. Does TRADANET approves
these partnerships?
If you can throw some light on this it would be great.
We are having a conference call tonight to resolve
this issue.
Appreciate your help.
Regards
Uppaji.
--- "Burbury, Michael (GXS)" <
wrote:
> Hi all,
>
> Just a quick note:
>
> SNDR ID/QLFR incorrect error message from
> EDI*EXPRESS.
>
> If you setup your "ANY" Trading Relationship with
> your partner, then this
> error will come up if your partner has not yet
> approved your request for the
> trading relationship and you have attempted to send
> them data that was
> otherwise valid. Run a Trading Relationship report
> and it will show you the
> status of the relationship. If it shows "Pending",
> then your partner needs
> to approve your request before trading may begin.
> It should show "Active"
> meaning it's been approved. Before trading can
> begin, one party must create
> the relationship request and the other must approve
> it before data will
> flow. Your email suggests you created the request
> but your partner may not
> have approved it yet. If your partner uses an
> Interconnect with GXS, then
> it "should" be automatically approved - the TPR
> report will show you it's
> status and then please allow 3 hours for it to
> replicate over the "many"
> machines used to run the service (IE: after your
> partner appoves it, give it
> a few hours before attempting to use it - I have
> timed this and it generally
> takes 1.5 hours to replicate over all the nodes
> databases, but I'm in
> Australia so my daytime is the U.S. night-time so
> during the U.S. day it may
> be slower).
>
> Tradacoms does not require EDI Address Qualifiers,
> they are optional.
>
> EDI*EXPRESS will support Tradacoms with or without
> Address qualifiers.
>
>
> Cheers...
>
> Michael Burbury
> GE ecXpress Australia
> Systems Administration
>
> -----Original Message-----
> From: Uppaji Kothapalli [mailto:
> Sent: Tuesday, October 08, 2002 2:34 PM
> To:
> Subject: [EDI-L] Setting up TRADAOMS partners on
> GEIS EDI EXPRESS
>
>
> Hi All, thanks for your inputs on the EDIFACT issue.
> FInally CLEO has to update their VARFILE for the
> CR+LF
> as requird by GEIS.
> Now I have one more question:
> Has any one got the experience of settting up of the
> TRADACOMS partners on GEGXS EDI Express website?
> What
> should be used for the "format type" :
> ANY/STX*ANA*1/STX*ANAA*1.......
> please suggest.
> Also do we have to include the qualifiers? As the
> documents come with NO qualifiers.
>
> The documents are failing with the errror" SNDR
> ID/QLFR incorrect" inspite of setting up of the
> FORMAT
> to ANY.
> Any help/suggestion would be greatly appreciated.
> Best Regards
> Uppaji.
>
|
|
Subscribe in XML format
| RSS 2.0 |
|
| Atom 0.3 |
|
|
Cart
