|
[EDI-L Mailing List Archive Home]
[Message List]
[Reply To This Message]
Re: Setting up of EDI vendors - TCP/IP ports
We have the firewall assigning my outside IP address and 1 port open
for AS2 communications. Could the confusion be caused by the Wal-
Mart "for any port greater than 1023"? I've seen a few people
confused by that one but it just means choose any 1 port greater than
1023.
Hope this helps.
Laurie
--- In Joe Matuscak <matuscak@r...> wrote:
>
> Speaking of IP ports, I've got a discussion going on another list I
follow
> on Internet firewalls with a fellow that is trying to set up AS2.
>
> It sounds like he is being told that his firewall has to have a
tunnel
> from his outside IP address to the AS2 server for the "base" port
(I think
> he mentioned using 4080) *plus* all ports > 1023 tunneled to the AS2
> server. This doesn't sound right to me.
>
> The inbound tunnel for the base port is obvious, but I would expect
that
> everything else should be handled automatically by pretty much any
> stateful firewall. What is the experience of people here that
have set
> up a AS2 server behind a firewall?? (If it matters, he mentioned
his AS2
> software is from iSoft)
>
> Thanks,
>
>
> Joe Matuscak
> Rohrer Corporation
> 717 Seville Road
> Wadsworth, Ohio 44281
> (330)335-1541
> matuscak@r...
|
 |
Subscribe in XML format
| RSS 2.0 |
|
| Atom 0.3 |
|
|
Cart
